Specifications
BBI-336 Series
AIR FLOW
- Internal air circulation is approximately 1500 CFM
- Creates a very uniform temperature throughout the incubator
- Design air flow is about double what is required by the developing
embryo's
- Individual air ports blow over each row of eggs, preventing
any stratification of air in the egg compartment.
- Recirculation air and incoming air are thoroughly blended
in the plenum chamber behind the egg compartment, preventing
any buildup of CO2 in the egg compartment
- Air Flow is adjustable to allow for different incubating
conditions (may vary depending on number of eggs being incubated).
 SWING BEAM EGG ROTATION:
- The Swing Beam Egg Rotation system allows more free space
between the eggs, hence better air flow.
- There is full 140° rotation of the egg for proper nutriating
of the developing embryo.
- Each egg is firmly grasped with our unique egg cradle which
prevents eggs from bunching up together as is common in roller
type machines. It also provides 100% egg surface contact to the
air stream.
- Eggs may be incubated either standing up or laying down depending
on user preference.
- Each egg dolly has its own independent rotation system and
controls.
ENERGY EFFICIENT
- Waste heat from the blowers increases the machine energy
efficiency.
- Operating costs as low as $2.60 per day (Based on 7¢/kwh).
EGG CANDLING
- Candle your eggs in place and work inside your machine.
|
Recommended Requirements
| Electrical |
20 Amp 220 VAC |
Room Temperature
(Operating Range) |
63 ° F (16.5° C)
to 80° F (26 ° C) |
| Room Ventilation |
Minimum 1.5 cu metre/minute/unit
(60 CFM) |
| Water Supply |
40 - 60 psi (275-410 Kpa) |
| Drain |
3/8 (9.5 mm) Hose |
| Door Access |
3'0 (1 m) |
| Alarm |
Dry contacts for hookups to auto
dialer
or alarm system. |
|
